Kirby Avalir 2 Vacuum Review 2018

December 21, 2018

 

Links to related vacuums here:

 

Kirby Avalir 2 on Ebay: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337945138&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dp2380057.m570.l1312.R1.TR10.TRC3.A0.H0.Xkirby.TRS2%26_nkw%3DKirby%2BAvalir%2B2%26_sacat%3D0

 

I am super excited to be testing the Kirby Avalir 2 which came out in early 2018. I love the way Kirbys look and feel. It's like it came out of a different century, and, I guess, in a way it has. Kirby hasn’t really changed the basic design of their vacuums for a long time. The differences between the Avalir 2 and the previous generation, the Avalir 1, for example, are pretty minimal - things like color scheme and really minor tweaks.

 

So, after a week of testing the Avalir 2, I think I'm ready to do a pros and cons review.

 

Link at the top to the current search results for new and used Avalir 2 on Ebay, and let's get started with the pros.

 

Kirby vacuums are pretty much the undisputed champions of airflow. Nothing else really comes close. For example, at the floor head we measured 5079 fpm of airflow, or 132 cfm, which is just amazing. For context, the Dyson Ball Animal 2, which is one of the best regular consumer vacuums in the airflow category, measured only 2126 fpm. That means the Kirby has more than double the amount of airflow of the most powerful model in Dyson’s lineup, which is pretty crazy if you think about it.

 

That basically means the Avalir 2 pretty much sucks up everything in its way and can do things that other vacuums just can't do because of its crazy amount of airflow.

 

In canister mode, with the hard floor attachment, the airflow is reduced somewhat, but it still measured 2736 fpm. Again, for context, the Dyson V10, which has the highest airflow of any cordless vacuum we know of, measured 1929 fpm at the cleaner head. So, the Kirby has about 30% more airflow than the Dyson V10 even in canister mode.

 

Another thing that Kirbys are really good at, and the Avalir 2 is no exception, is carpet agitation. Kirby’s powerful motor, combined with a sturdy wooden roller with stiff bristles means that the brush roll agitates debris that hides all the way at the bottom of carpet, and the aforementioned airflow then sucks it all up. It's basically designed for deep cleaning carpets. This is why they have been successful in a door-to-door sales, because they can have people vacuum their carpet with their old vacuum, then run the Kirby over the same area and show them how much dirt their old vacuum missed.

 

The third thing that Kirbys are really good at is being incredibly versatile. It's an upright vacuum, but with the right attachments, it also can convert to a canister vacuum, a carpet and furniture shampooer, a hard floor polishing machine, a blower, a paint sprayer, a handheld vacuum for mattresses and furniture, a mop, a tile and grout cleaner, and more.

 

As a carpet shampooer, it uses what’s called a dry foam technique which allows for faster drying of carpets. It took me a minute to figure out what I was doing, as I had the foam up too high and the height adjustment all wrong at first, but when I did figure it out, I found that it cleaned all the mud off our test carpet and dried by the next morning. The setup wasn’t too bad, especially once you know what you're doing. I plan on more tests with the shampooer in the future, but, for now, I will just say that I was impressed, and I look forward to see what it does with tougher stains.

 

Alright, let's move on to the cons.

 

Kirbys are heavy. To be fair, Kirby has lightened the load over the years and added things like a self propelled transmission where you can put it in drive, and, basically, it's like pushing an incredibly light vacuum. I have no issues with that aspect and found it worked really well, but even in canister mode, it weighs about 18lbs, which, again, to be fair, only comes into play when you have to carry it up stairs, because as a canister, it follows you around pretty good, but if you do have a lot of stairs, the Kirby's weight would be a big con.

 

Another con would be that it's not great for hard floors in its upright mode. As long as you turn the brushroll off, it does a pretty good job on hard floors, but if you encounter a lot of bigger debris, you need to adjust the height a lot - too low and it just pushes it around, too high and it won't pick it up. And because in upright mode, the Kirby doesn’t have a hose you can pull out for larger debris, you are stuck with adjusting the height to get the debris. Kirby does have an attachment which I don’t have but it basically snaps on to the bottom of the Kirby in upright mode and, apparently, makes it much better on hard floors without switching to canister mode. 

 

Still, though, if you have a lot of hard floors, the Kirby in canister mode is what you want. It takes me about a minute and a half to switch it over.

The super powerful airflow can be controlled with a switch on the handle.

 

It's decent for carpets in canister mode, but the tools provided really are not designed well for carpets, and though the Kirby attachments are only fair in my opinion, the good news is that size of the attachments, 1 ¼” or 32 mm, is one of the most common, so you can find all kinds of third party attachments to take advantage of all that airflow. 

 

So, I guess my con here is that if you have an equal mix of hard floors and carpet in your house, it can be a bit of pain switching back and forth from canister to upright mode. Again you can vacuum carpets in canister mode or hard floors in upright mode, but it's better to take the time to switch modes for best results.

 

Also, I would say that there is a bit of a learning curve with Kirbys. You really need to take some time and learn how to use it. It's not as plug-and-play as most vacuums these days are, but once you do know how to change the head or attach the shampooer, or convert it to canister mode, it all seems pretty intuitive. It's just a learning curve.

 

So, I would say that Kirbys aren’t for everyone. They do have some drawbacks, but the huge amounts of airflow combined with strong agitation makes them one of the best carpet deep cleaners ever built. And when you throw in that it can convert to so many different machines, it makes the Kirby Avalir 2 a really compelling vacuum.

 

I plan on putting out a lot more content on the Kirby Avalir 2, so be sure to subscribe.

 

Links at the top and a special thanks to Vaclab on YouTube and to the community at the vacuumland.org for all the advice.

 

Thanks for watching!

 

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Share on Facebook
Share on Twitter
Please reload

“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.”

This site was designed with the
.com
website builder. Create your website today.
Start Now